Home > ELECTRIC ACTUATOR CENTER > ROD TYPE ELECTRIC ACTUATORS > DC LINEAR SOLENOIDS >

PPS-1-11-24V Push Pull Solenoid, 24VDC, 1" Travel, 11-25 lbs force
Linear Solenoid 11 lbs force
PPS-1-11-24V
 
Alternative Views:


Our Price: $112.30

Product Code: PPS-1-11-24V

Description
 

Versatility- A single unit for push or pull applications

-24VDC high speed operation
-25 lbs force at min stroke, 11 lbs at max stroke, 27 lbs holding (without return spring)

-14 lbs force at min stroke, 7 lbs at max stroke, 15 lbs holding (with return spring) 

-Continuous duty rated
-29 amps inrush, .5 amps holding current @ 24VDC
-Will operate at any stroke less than maximum (1")

-Unit comes complete with return spring, rubber boot, threaded shaft and nut

-24 oz shipping weight

 
 
 
 Application notes: 
-Energize Coil should not be energized for longer than 15 seconds to avoid coil damage

-Precautions should be taken to avoid overheating Energize Coil via proper wiring/switching setup and/or use of SD85 Energize/Hold control relay

-Allow 15 minutes cooling time between activations of the Energize Coil (less for shorter energize coil cycles)

-Energize Coil must fully seat the plunger to allow Hold Coil to function properly

-Do not mount with boot down (unit is recommended for horizontal application only)
-Do not apply grease or lubrication to parts
-Use minimum 10 AWG wire size as noted in wiring diagram and keep wire lengths to a minimum
-Caution: The solenoid housing is hot to the touch. A temperature rise to 185F (85C) is permissible

 


Accessories for this product...
PPD-85 Push Pull Solenoid Driver
Our Price: $165.05

Add
Solenoid driver

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ELECTRIC ACTUATOR CENTER > ROD TYPE ELECTRIC ACTUATORS
ELECTRIC ACTUATOR CENTER > ROD TYPE ELECTRIC ACTUATORS > DC LINEAR SOLENOIDS