Metal Work Electric ISO 15552 Cylinders

> Download Electric ISO Catalog (2MB)    

An electric cylinder with a connection interface in accordance with ISO 15552. The piston rod extension is controlled by a system with a hardened screw and recirculating ball screw nut. The piston has a guide strip calibrated to reduce to a minimum play with the barrel and hence vibration during ball screw rotation. 

The cylinder can be equipped with a built-in non-rotating system featuring two opposing slides that run in separate longitudinal slots in the barrel. The piston comes with magnets and the barrel has longitudinal slots for housing sensors. 

The piston rod has increased outside diameter and thickness to make it extra rigid and more resistant to radial and peak loads. A system for greasing the screws is included. 

Numerous standard accessories for pneumatic cylinders, can be used for mounting. 

The motor can be selected from an optimised range, which encompasses both STEPPING and BRUSHLESS motors with direct or geared drive. There is a version with a brake mounted on the motor. Stepping motors are also available with a brake and encoder (all BRUSHLESS motors come with an encoder). It is important to remember that the brake is static type, so the motor must be stopped before the brake is engaged.